CNC Machining, CNC Grinding, Robotic Parts Handling Surplus Assets to GE Aerospace Rutland, VT

Starts: 02 April 2026 at 05:00 BST
Ends: 07 May 2026 at 18:00 BST
Featuring: (6) Okuma ACE Center MB-46VAE 4-Axis CNC Vertical Machining Centers as Late as 2010 • (6) HAAS VF-3YT, VF-2 CNC Vertical Machining Centers Converted for Grinding • (2) Fanuc M-710ic/50T 6-Axis Robots with Overhead Gantry Systems • (3) 2007 Chip Blaster Model J4 High Pressure Coolant Pumps, Safety Caging
Register for auctionEssential Information
Share:
Showing 15 of 15 lots
  • 1-1.jpg
    1-2.jpg
    1-3.jpg
    1-4.jpg
    1-5.jpg
    1-20.jpg
    site
    LOT 1

    2010 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center

    2010 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center, OSP-P200M CNC Controls, Travels: X-30", Y-18.11", Z-18.11", 18.11 x 39.37" Table, 1,540# Table Load Capacity, CAT 40-Taper Spindle, 32-Position ATC, Complete with Spider Cool Programmable Coolant Nozzle, Probing, Dakin Oil Chiller, (No Mist Collector), S/N: 150567
    View Item
  • 2-1.jpg
    2-2.jpg
    2-3.jpg
    2-4.jpg
    2-5.jpg
    2-6.jpg
    2-7.jpg
    2-8.jpg
    2-9.jpg
    2-10.jpg
    2-11.jpg
    2-20.jpg
    2-21.jpg
    site
    LOT 2

    2008 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center

    2008 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center, OSP-P200M CNC Controls, Travels: X-30", Y-18.11", Z-18.11", 18.11 x 39.37" Table, 1,540# Table Load Capacity, CAT 40-Taper Spindle, 32-Position ATC, Complete with Spider Cool Programmable Coolant Nozzle, Chip Blaster J4 High-Pressure Coolant Pump,Dakin Oil Chiller, (No Mist Collector), S/N: 141149
    View Item
  • 3-1.jpg
    3-2.jpg
    3-3.jpg
    3-4.jpg
    3-5.jpg
    3-6.jpg
    3-7.jpg
    3-8.jpg
    3-10.jpg
    3-11.jpg
    3-12.jpg
    3-17.jpg
    3-19.jpg
    3-20.jpg
    site
    LOT 3

    2010 HAAS VF-2 CNC Vertical Machining Center Converted for Grinding

    2010 HAAS VF-2 CNC Vertical Machining Center Converted for Grinding, Travels: X-30", Y-16", Z-20", 36" x 14" Slotted Table, CAT 40-Taper Spindle, 20-Position ATC, 8,000 RPM Spindle Speeds, Complete with Wendt Diamond Dresser, S/N: 1080493
    View Item
  • 4-1.jpg
    4-2.jpg
    4-3.jpg
    4-4.jpg
    4-5.jpg
    4-6.jpg
    4-15.jpg
    4-16.jpg
    4-17.jpg
    4-19.jpg
    4-20.jpg
    site
    LOT 4

    2010 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center

    2008 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center, OSP-P200M CNC Controls, Travels: X-30", Y-18.11", Z-18.11", 18.11 x 39.37" Table, 1,540# Table Load Capacity, CAT 40-Taper Spindle, 32-Position ATC, Complete with 10" 4th Axis Rotary Table, Spider Cool Programmable Coolant Nozzle, Chip Blaster J4 High-Pressure Coolant Pump,Dakin Oil Chiller, (No Mist Collector), S/N: 141148
    View Item
  • 5-1.jpg
    5-2.jpg
    5-3.jpg
    5-4.jpg
    5-5.jpg
    5-6.jpg
    5-7.jpg
    5-8.jpg
    5-9.jpg
    5-10.jpg
    5-11.jpg
    5-12.jpg
    5-18.jpg
    5-19.jpg
    5-20.jpg
    site
    LOT 5

    2010 HAAS VF-3YT/50 CNC Vertical Machining Center Converted for Grinding

    2010 HAAS VF-3YT/50 CNC Vertical Machining Center Converted for Grinding, HAAS CNC Controls, Travels: X-40", Y-26", Z-25", 54" x 24" Slotted Table, CAT 50-Taper Spindle, 30-Positon ATC, 30-HP, 7,500 RPM, Complete with 14" 4th Axis Rotary Table, (2) Diamond Wheel Dressers, S/N: 1080742
    View Item
  • 6-1.jpg
    6-2.jpg
    6-3.jpg
    6-4.jpg
    6-5.jpg
    6-6.jpg
    6-7.jpg
    6-8.jpg
    6-9.jpg
    6-10.jpg
    6-11.jpg
    6-18.jpg
    6-19.jpg
    6-20.jpg
    site
    LOT 6

    2011 HAAS VF-3YT CNC Vertical Machining Center Converted for Grinding

    2011 HAAS VF-3YT CNC Vertical Machining Center Converted for Grinding, HAAS CNC Controls, Travels: X-40", Y-26", Z-25", 54" x 24" Slotted Table, CAT 50-Taper Spindle, 30-Positon ATC, 30-HP, 7,500 RPM, Complete with 14" 4th Axis Rotary Table, (2) Diamond Wheel Dressers, S/N: 1083367
    View Item
  • 7-1.jpg
    7-2.jpg
    7-3.jpg
    7-4.jpg
    7-5.jpg
    7-6.jpg
    7-7.jpg
    7-8.jpg
    7-9.jpg
    7-10.jpg
    7-11.jpg
    7-12.jpg
    7-13.jpg
    7-14.jpg
    7-15.jpg
    7-16.jpg
    7-20.jpg
    7-21.jpg
    7-22.jpg
    7-23.jpg
    7-30.jpg
    7-31.jpg
    7-40.jpg
    site
    LOT 7

    Robotic Overhead Automated Gantry Cell Loading System with Fanuc M-710ic 50T 6-Axis Robot

    Robotic Overhead Automated Gantry Cell Loading System with Fanuc M-710ic 50T 6-Axis Robot, 50kg Payload, 1900mm Reach, Robot Teach Pendant, Fanuc System R-30iA Robot Controller, 500" Overhead Gantry Track
    View Item
  • site
    LOT 8

    Complete Safety Caging Approx 53' with 6 Doors, Interlocks, Etc.

    Complete Safety Caging Approx 53' with 6 Doors, Interlocks, Etc.
    View Item
  • 11-1.jpg
    11-2.jpg
    11-10.jpg
    11-18.jpg
    11-19.jpg
    11-20.jpg
    site
    LOT 9

    2010 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center

    2010 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center, OSP-P200M CNC Controls, Travels: X-30", Y-18.11", Z-18.11", 18.11 x 39.37" Table, 1,540# Table Load Capacity, CAT 40-Taper Spindle, 32-Position ATC, Complete with 10" 4th Axis Rotary Table, Spider Cool Programmable Coolant Nozzle, Probing, Dakin Oil Chiller, (No Mist Collector), S/N: 150808
    View Item
  • 12-1.jpg
    12-2.jpg
    12-3.jpg
    12-4.jpg
    12-5.jpg
    12-6.jpg
    12-18.jpg
    12-19.jpg
    12-20.jpg
    12-21.jpg
    site
    LOT 10

    2010 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center

    2010 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center, OSP-P200M CNC Controls, Travels: X-30", Y-18.11", Z-18.11", 18.11 x 39.37" Table, 1,540# Table Load Capacity, CAT 40-Taper Spindle, 32-Position ATC, Complete with 10" 4th Axis Rotary Table, Spider Cool Programmable Coolant Nozzle, Probing, Dakin Oil Chiller, (No Mist Collector), S/N: 150804
    View Item
  • 13-1.jpg
    13-2.jpg
    13-3.jpg
    13-4.jpg
    13-5.jpg
    13-6.jpg
    13-7.jpg
    13-18.jpg
    13-19.jpg
    13-20.jpg
    site
    LOT 11

    2011 HAAS VF-2 CNC Vertical Machining Center Converted for Grinding

    2011 HAAS VF-2 CNC Vertical Machining Center Converted for Grinding, Travels: X-30", Y-16", Z-20", 36" x 14" Slotted Table, CAT 40-Taper Spindle, 20-Position ATC, 8,000 RPM Spindle Speeds, Complete with Wendt Diamond Dresser, S/N: 1083517
    View Item
  • 14-1.jpg
    14-2.jpg
    14-3.jpg
    14-4.jpg
    14-5.jpg
    14-6.jpg
    14-7.jpg
    14-10.jpg
    14-11.jpg
    14-12.jpg
    14-13.jpg
    14-19.jpg
    14-20.jpg
    14-21.jpg
    site
    LOT 12

    2008 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center

    2008 Okuma Ace Center MB-46VAE 4-Axis CNC Vertical Machining Center, OSP-P200M CNC Controls, Travels: X-30", Y-18.11", Z-18.11", 18.11 x 39.37" Table, 1,540# Table Load Capacity, CAT 40-Taper Spindle, 32-Position ATC, Complete with 10" 4th Axis Rotary Table, Spider Cool Programmable Coolant Nozzle, Chip Blaster J4 High-Pressure Coolant Pump,Dakin Oil Chiller, (No Mist Collector), S/N: 141151
    View Item
  • 15-1.jpg
    15-2.jpg
    15-3.jpg
    15-4.jpg
    15-5.jpg
    15-6.jpg
    15-7.jpg
    15-8.jpg
    site
    LOT 13

    2011 HAAS VF-3YT/50 CNC Vertical Machining Center Converted for Grinding

    2011 HAAS VF-3YT/50 CNC Vertical Machining Center Converted for Grinding, HAAS CNC Controls, Travels: X-40", Y-26", Z-25", 54" x 24" Slotted Table, CAT 50-Taper Spindle, 30-Positon ATC, 30-HP, 7,500 RPM, Complete with 14" 4th Axis Rotary Table, (2) Diamond Wheel Dressers, S/N: 1083409
    View Item
  • 16-1.jpg
    16-2.jpg
    16-3.jpg
    16-4.jpg
    16-5.jpg
    16-6.jpg
    16-18.jpg
    16-19.jpg
    16-20.jpg
    site
    LOT 14

    2011 HAAS VF-3YT/50 CNC Vertical Machining Center Converted for Grinding

    2011 HAAS VF-3YT/50 CNC Vertical Machining Center Converted for Grinding, HAAS CNC Controls, Travels: X-40", Y-26", Z-25", 54" x 24" Slotted Table, CAT 50-Taper Spindle, 30-Positon ATC, 30-HP, 7,500 RPM, Complete with 14" 4th Axis Rotary Table, (2) Diamond Wheel Dressers, S/N: 1083410
    View Item
  • 20-1.jpg
    20-2.jpg
    20-3.jpg
    20-4.jpg
    20-5.jpg
    20-6.jpg
    20-7.jpg
    20-8.jpg
    20-9.jpg
    20-10.jpg
    20-11.jpg
    20-12.jpg
    20-13.jpg
    20-14.jpg
    20-15.jpg
    20-16.jpg
    site
    LOT 15

    Robotic Overhead Automated Gantry Cell Loading System with Fanuc M-710ic 50T 6-Axis Robot

    Robotic Overhead Automated Gantry Cell Loading System with Fanuc M-710ic 50T 6-Axis Robot, 50kg Payload, 1900mm Reach, Robot Teach Pendant, Fanuc System R-30iA Robot Controller, 500" Overhead Gantry Track
    View Item

Essential Information

General Information

Auction Dates
Starts: 02 April 2026 at 05:00 BST
Ends: 07 May 2026 at 18:00 BST
Site Address
270 Windcrest Road
N. Clarendon
VT
05759
United States
Viewing Days
By Appointment Only
please contact us to schedule an inspection appointment

Fees & Payment

Currency
USD
Buyers Premium
18% or as specified on individual items
Payment

General payment information

  • Payment is due immediately upon receipt of the invoice.
  • All payments must be made in the currency stated on the invoice.

    Payment Terms
    • Company Checks up to $3,000 USD
    • Certified Checks over $3,000 USD
    • Wire Transfer
    • Money orders or cash will not be accepted.
    • Credit Cards (3% Processing Fee will be Applied) (Call +1 631-418-8261 for CC Payment)

    No payments will be accepted on-site; all payments need to be mailed to our office
    Please make checks payable to

    Apex Auctions USA
    315 Walt Whitman Road

Goods

Clearance days
11 May 2026 at 13:00 BST - 22 May 2026 at 21:00 BST
See clearance section for GE Approved Machinery Mover
General Collection Information

Collection

  • International Shipping Needed?

    PREFERRED DOMESTIC & INTERNATIONAL FREIGHT FORWARDING/RIGGING CARRIER
    Miami Global Lines (MGL)

    Contact: Hamid HussainiHamidH@miamigloballines.com | Quotes@miamigloballines.com 
    Phone/WhatsApp: +1-848-219-7924

    Collection

    Buyers are fully responsible for the removal of items plus all shipping and rigging charges.

    Due to insurance regulations Apex will not supply a forklift, or other motorized rigging equipment to support loading, packaging, or shipping, unless specifically posted.

    Items are only available to collect once the transferred funds have cleared and a collection appointment has been booked.

    Buyers or third-party movers must present an invoice to the on-site personnel when removing their items.

    Buyers must complete the removal of items within the clearance deadline. Unless otherwise stated, normal removal hours are Monday through Friday, 9 a.m. to 4 p.m. (local time).

    Contact and removal information will be emailed at the time invoices are issued

Sales Contacts
Auction information
Mathew Koster
315 Walt Whitman Road
Huntington Station
NY
11746
United States
 

+1(631) 418-8850