Excellent opportunities following the closure of a mechanical engineering and mechanical welding factory
Starts: 11 December 2025 at 12:00 GMT
Ends: 19 February 2026 at 14:00 GMT
Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing. Collection is available by appointment from March 3 to March 5, 2026, except for Lots 1 and 2, which can be collected by appointment until March 20, 2026.
Share:
Showing 116 of 116 lots
- LOT 1
![site]()
CORREA FOX 40 gantry milling machine – 5 axes – 2020
CORREA FOX 40 5-axis gantry milling machine – year of manufacture 2020 – HEIDENHAIN TNC 640 numerical control – machine installed in 2021 – X 4000mm, Y 3000mm, Z 1000mm – 40-tool changer – machine serial number 670124 – CORREA UAD head – Speed 6,000 rpm - Number of hours: machine hours under power 4,724 - machine hours without emergency 3,561 - hours of rotation with 1 UAD head: 1,167 - hours of rotation of the spindle and axes in motion: 1,069 - MACHINE STILL UNDER CORREA WARRANTY - Weight 55,000 kg - Origin: Spain - LOT 2
![site]()
KMT / LDSA LDSA WJA II 40.30 – 2 TI high-pressure water jet cutting machine
Year 2012 - Working area: 4000 × 3000 mm (table 4440x3220mm - Maximum thickness: 200 mm (depending on material) – 2 heads - Longitudinal axis Y and V (slave) 4120mm - Transverse axis X: 3000mm - Max. speed for X and Y 30 m/min - Vertical Z axis 200 mm - Max. speed 15 mm/min - COMPOSITION: KMT STREAMLINE SL-V 50 PLUS high-pressure pump - 3500 bar - 50 HP - 1-nozzle abrasive cutting head - FANUC Series 31i model A CNC (touchscreen console) - 1-tonne abrasive sand feed hopper with KMT ABRALINE 2012 system - Sludge recovery unit + LDSA GRAVITAIR P03 belt filter (2012) - Water softener + mini-treatment plant - Worthington Creyssensac ROLLAIR 900 compressor (2012) - Complete safety barrier with light beams - total weight approx. 8 tonnes - origin Germany - Other videos available on request - LOT 3
![site]()
1 COMEV PICODUE 400 numerically controlled horizontal lathe
Year 2008 - Height at centre point 400 mm - Maximum diameter on bench 800 mm - Distance between centres 4000 mm - Maximum diameter above carriage 460 mm - 8-tool turret - Bench width 400 mm – Spindle bore 110 - Continuously variable spindle speed 0 to 1500 rpm - X and Z axis speed 10 m/min - 29KW motor - Fixed steady rest Ø 350mm and tailstock - Digital control by learning - Number of hours 1545.60 - Weight approx. 8T - Origin Italy - LOT 4
![site]()
POREBA TR 135 B2 parallel horizontal lathe
Centre height 700 mm - Centre distance 4000 mm - Turning diameter 1350 mm - Broken - Ø 1600 mm in the broken section - Spindle speeds 5-630 rpm - Boring diameter 120 mm - 4 fixed steady rests of different diameters - 2 boring bars - 2 chucks - Weight 12.5 tonnes - Origin: Poland - LOT 5
![site]()
HURON RU 991 fixed bed milling machine
X/Y/Z travels 4500/1000/1000 mm - Table dimensions 6155 x 1000 mm - Spindle speed 2066 rpm - Feed speed variator - Weight approx. 19 tonnes - Origin: France - LOT 6
![site]()
HURON RU 771 fixed bed milling machine
X/Y/Z travels: 2500/1000/1000 mm - Table dimensions: 4155 x 1000 mm - Spindle speed: 2066 rpm - Weight: approx. 15 tonnes - Country of origin: France - LOT 7
![site]()
POREBA TR 90 horizontal parallel lathe
centre height 465mm - Centre distance 4000mm - Turning diameter 930 mm - Broken - Ø 1380 mm in the broken section - Spindle speeds 5-1500 rpm - Boring diameter 195 mm - 2 fixed steady rests of different diameters - 2 chucks - Weight 7.5 tonnes - Origin: Poland - LOT 8
![site]()
GSP 405 K 150 radial drill
CM4 - Spindle travel 320 mm - Arm length 1500 mm - Drilling radius Min. 465 mm / Max. 1500 mm - Rotation speeds 12-1800 rpm - Spindle feed 0.045-0.50 mm/rev - Arm locking Hydraulic - Max. tool/table height 1400 mm – drilling die on table 1000 x 700 x 600 mm - Approximate weight 6000 kg – Origin FRANCE - LOT 9
![site]()
ROLLAIR RLR 900 T 500 F soundproof screw compressor
Motor power 7.5 kW (10 HP) - Air flow (at 8 bar) 0.9 m³/min (900 L/min) or 54 m³/h - Max pressure 10 bar (configurable 8/10 bar) - Noise level 68 dB(A) (soundproofed, can be installed close to workstations) - Power supply 400 V / 3 phases / 50 Hz (IP23) - 500 L tank - Integrated air dryer - Weight approx. 500 kg – ORIGIN ITALY - LOT 10
![site]()
A.COLLY PV200 S hydraulic press
Capacity 200 tonnes - Maximum operating pressure 250 kg/cm² - travel 360 mm - Table 1200 x 800 mm - Origin: France - Approximate weight: 5 tonnes - LOT 11
![site]()
ALCERA 1203 milling machine
travel XYZ 700/300/450 mm - Table 1200x300 mm - Speed 40-2000 rpm - 6 hp motor - Weight 2000 kg - Origin: France - LOT 12
![site]()
STANKO 7A420 Slotting machine
Slider travel 20–200 mm – Table diameter 500 mm – Max. transverse travel 400 mm – Max. longitudinal travel 500 mm – Circular travel 360° – Weight approx. 2,000 kg – Origin: Russia - LOT 13
![site]()
GSP 405 K 150 radial drill
CM4 - Spindle travel 320 mm - Arm length 1500 mm - Drilling radius Min. 465 mm / Max. 1500 mm - Rotation speeds 12-1800 rpm - Spindle feed 0.045-0.50 mm/rev - Arm locking Hydraulic - Max. tool/table height 1400 mm – drilling die on table 1000 x 800 x 690 mm - Approximate weight 6000 kg – Origin FRANCE - LOT 14
![site]()
FARO FUSION portable measuring arm
Year 2012 - volumetric +/- 0.61 mm - single point 0.043 mm - 6 axes - portable articulated arm with magnetic base - software and screen - measuring range 1.8 m - origin China - weight approx. 30 kg - LOT 15
![site]()
YALE MS16 IL 1.6T stacker
Fork length 1150mm - Capacity 1.6 tonnes - 2017 - Weight 900kg - D852T02710R - Weight with battery approx. 1.2 tonnes - Origin Italy - LOT 16
![site]()
ERNAULT BATIGNOLLES HN 500 horizontal parallel lathe
Between centres 1600 mm - Dimensions 3302 x 1535 x 1230 mm - Maximum diameter above the bench 500 mm - Maximum diameter above the cast iron slide 320 mm - Maximum diameter above the steel slide 320 mm - Maximum diameter in the break 660 mm - Headstock speed 16 to 1600 rpm - Origin France - Year 1962 - Weight 3 tonnes - LOT 17
![site]()
BOMBLED 15 M moulding/knurling machine
max. thickness 6 mm - distance between rollers/gooseneck 475 mm - max. Ø allowed 1600 mm - 2 working speeds - 6 and 12 m/min - 5 hp motor - weight approx. 2000 kg - made in France - LOT 18
![site]()
VERNET C1 profile bender
Capacity: 50 mm angle bars - Approximate weight: 800 kg - Origin: France - LOT 20
![site]()
COLLY P502A press brake
Force 50 tonnes - Max. bending length 2000mm - travel 100mm - 5 HP motor - Sold with tools - Weight 3 tonnes - LOT 21
![site]()
MAPE BAS150S double grinding and sharpening wheel
Speed 3000 rpm - Grinding wheel diameter 150 mm - Sharpening device - 1 hp motor Weight 200 kg - Made in France - LOT 22
![site]()
MAPE BAS double grinding and sharpening wheel
Speed 3000 rpm - Grinding wheel diameter 150 mm - Sharpening device - 1 hp motor Weight 200 kg - Made in France - LOT 23
![site]()
ULTRA US40 saw
Sawing capacity: 400x350mm - Round capacity Ø 400mm - Blade length 600mm - 4 HP motor - Weight 1350kg - Origin: France - LOT 24
![site]()
CINCINNATI CHOMIENNE PE bench drill
No. 6534 - Capacity 17 mm - Speed 220 to 4000 rpm - 220/380 V - Origin: France - Weight: 250 kg - LOT 25
![site]()
NAGEOTTE CP1508 4-roller rolling machine
Capacity 8x1500 mm - Approximate weight 3 tonnes - Origin: France - LOT 26
![site]()
UNELEC 5T double-girder overhead travelling crane with KI 5T hoist
Capacity 5 tonnes - Height under hook 4000 mm - Reach 18000 mm - TELEMECANIQUE remote control with 7 buttons - Weight 5 tonnes - Origin: France - LOT 27
![site]()
ALSTHOM 5T single-girder overhead travelling crane with 5T hoist
Hook height 4000mm - Reach 18000mm - TELEMECANIQUE remote control with 8 buttons - Lifting beam not included - Weight 5 tonnes - Made in France - LOT 28
![site]()
SAF-FRO DIGI@PULS 420 welding machine
Power: 420A (60%) - 350A (100%) - Power supply: 400V three-phase Consumption: 22.1A (Imax 28A) - Weight: 40kg source only - Origin: France - LOT 29
![site]()
AIR LIQUIDE SAF BUFFALO 400 DC welding machine
Power: 400A (35%) 280A (100%) Power supply: 230/400V three-phase - Consumption: 77.2/44.4A - Weight: 185kg Dimensions: 1300x740x800mm - Made in France - LOT 30
![site]()
- LOT 31
![site]()
SAF SAXOTIG 1600 AC/DC welding machine
Power supply: 230 V single-phase - Frequency: 50/60 Hz Maximum current consumption: 19 A (TIG) 29 V (ARC EE) - No-load voltage: 82 V - Welding current: 5 A to 150 A - Duty cycle at 40°C at 100%: 100 A - Duty cycle at 40°C at 60%: 120 A - Duty cycle at 40°C at 30%: 150 A - Protection rating: IP 21 - Insulation class: H - Standard: EN 60974-1 - Dimensions: 175x300x420mm - Weight: 10.0 kg - HF ignition - Pre-gas and post-gas adjustment - TIG DC / EE mode - Made in Italy - LOT 32
![site]()
- LOT 33
![site]()
SAFARC M500 welding machine
No. 33569TG5230 - 95A/23.6V-530A/41V - 50 Hz - Origin: France - Weight: 40 kg - LOT 34
![site]()
Set of 4 lifting beams
34A & 34B: 1170x230x400 mm - 18 hooks - 34C & 34D: 2600x210x300 mm - 30 hooks - weight 400 kg - origin France - LOT 35
![site]()
KEVAC KMB3 extractor with castors
Year 2022 - serial no. 2022001374 - 13.5A - 50/60 Hz - dimensions 750x750x1600 mm - weight 65 kg - origin Italy - LOT 36
![site]()
PROFI 2.5T manual pallet truck
Capacity 2.5 tonnes - Fork length 1150mm - Year 2010 - Weight 79kg - Origin Germany - LOT 37
![site]()
MIC 2.2T manual pallet truck
Capacity 2.2 tonnes - Fork length 1150mm - Weight 61kg - Origin France - LOT 38
![site]()
Grooved cast iron machining cube
Dimensions 1120 x 600 x 460 mm - With hook 440 mm long, 270 mm high - Weight 700 kg - Origin: France - LOT 39
![site]()
Grooved cast iron machining cube
Dimensions 810x700x600mm - With hook 440mm long, 270mm high - Approx. weight 500kg - Origin: France - LOT 40
![site]()
COMMERCY CYGAZARC 600 welding machine with wheels
No. 94408 - Origin: France - Weight: 30 kg - LOT 41
![site]()
USINOR 3T roller gantry with VERLINDE 3T hoist
Total height: 3500 mm - Reach: 3000 mm - Total length: 4200 mm - Origin: France - Approximate weight: 600 kg - LOT 42
![site]()
TKG 5.0 V manual pallet lifter
Fork length 1000 mm - weight 350 kg - total dimensions 1200x1050x1700 mm - Serial No. 0496243031 - Origin: Germany - LOT 43
![site]()
Set of 4 welding curtains
Curtain height 1650 mm - total dimensions 1350x700x2000 mm - weight approx. 50 kg - origin France - LOT 44
![site]()
STRESS RELIEF ENGINEERING FORMULA 62 C vibration stress relief machine
3 operating modes - variable frequency control - analogue resonance meter - 220/230 V - 50 Hz - weight 80 kg - origin USA - LOT 45
![site]()
MASTOCK 500kg jib crane with YALE 500kg hoist
Height under hook 2750mm - Approx. reach 4000mm - TELEMECANIQUE remote control with 3 buttons - Made in France - Approx. weight 800kg - LOT 46
![site]()
MASTOCK 500kg jib crane with MASTOCK 500kg hoist
Height under hook 2750 mm - Approx. reach 4300 mm - TELEMECANIQUE 4-button remote control - Made in France - Approx. weight 800 kg - LOT 47
![site]()
- LOT 48
![site]()
Set of 19 metal bins
External dimensions 790x630x600mm - Internal dimensions 720x530x390mm - Unit weight 32kg - Made in France - LOT 49
![site]()
COMMERCY PM 250 welding positioner
Ø 600mm - Max. rotation speed 220 rpm - Axial load 450kg - Made in France - Weight 300kg - LOT 50
![site]()
MAPE grinding and sharpening wheel
220/380 V - Min/max Ø 90-150 mm - Max. speed 2800 rpm - Origin: France - Weight 150 kg - LOT 51
![site]()
CONSTAN grinder and sharpener
Spindle speed 4,200-9,600 rpm - Grinding wheel Ø 128-56 mm - Max. Ø allowed 125 mm - Origin: France - Weight approx. 300 kg - LOT 52
![site]()
ALSTHOM NP90A universal band saw
1390 rpm - 220/380 V - belt length 2970 mm - origin France - weight approx. 600 kg - LOT 53
![site]()
- LOT 54
![site]()
- LOT 55
![site]()
- LOT 56
![site]()
LMR adjustable dividing plate with tailstock and 3-jaw chuck to be mounted
Chuck diameter 250mm - Tailstock length 225mm - Weight 600kg - Origin: France - LOT 57
![site]()
- LOT 58
![site]()
- LOT 59
![site]()
Homemade oven
Capacity approx. 250 degrees - External dimensions 1020x840x740mm - Internal dimensions 600x800x400mm - Approx. weight 400kg - Origin: France - LOT 60
![site]()
- LOT 61
![site]()
Gas cutting trolley with wheels
Gas cylinders not included - Approx. weight without cylinders 100kg - Origin: France - LOT 62
![site]()
Workbench with Dolex vice
Work surface dimensions: 1920 x 1260 mm - Total height: 850 mm - Approximate weight: 200 kg - Origin: France - LOT 63
![site]()
- LOT 64
![site]()
- LOT 65
![site]()
- LOT 66
![site]()
- LOT 67
![site]()
- LOT 68
![site]()
- LOT 69
![site]()
ROCH micrometers with ROCH smooth ring
ROCH smooth ring gauge: Ø 125 mm - made in France - weight 10 kg - LOT 70
![site]()
- LOT 71
![site]()
- LOT 72
![site]()
MITUTOYO SJ-201M roughness tester with charger and accessories
Serial no. 521661610 - Origin: Japan - Weight: 5 kg - LOT 73
![site]()
- LOT 74
![site]()
MITUTOYO rubber hardness tester with standards
Serial number 12687 - origin Japan - weight 5 kg - LOT 75
![site]()
- LOT 76
![site]()
- LOT 77
![site]()
Set of 9 ROCH and SINOR gauge blocks
Various sizes from 200 to 1000 mm - origin France - Approx. weight 200 kg - LOT 78
![site]()
BOLLHOFF BRK 10 lever pliers for socket nuts
With box and nuts of various sizes TUBTEC - origin Germany - Approx. weight 20 kg - LOT 79
![site]()
- LOT 80
![site]()
- LOT 81
![site]()
- LOT 82
![site]()
Set of CASTOLIN EUTECTIC welding and soldering rods
Set of various welding rods/electrodes/solder of different sizes - origin France - 80 kg - LOT 83
![site]()
- LOT 84
![site]()
- LOT 85
![site]()
- LOT 86
![site]()
- LOT 87
![site]()
- LOT 88
![site]()
Set of 11 aluminium and steel coils
9 reels of SAF-FRO FILALU AIMg5 aluminium Ø 1 mm - 2 reels of SG2 steel - weight approx. 80 kg - origin France - LOT 89
![site]()
Store of various tools and equipment
Screws - nuts - washers - bearings, etc. - Origin: France - Approximate weight: 1.5 tonnes - LOT 90
![site]()
Set of 2 rolling trolleys
Red FACOM trolley: dimensions 680x420x700 mm - Blue trolley: dimensions 800x350x1020 mm - Tools shown in photo included - Origin: Germany - Weight: 100 kg - LOT 91
![site]()
- LOT 92
![site]()
Set of two sliding door cabinets
Dimensions of a cabinet: 1520 x 440 x 2010 mm - Origin: France - Approx. weight: 50 kg - LOT 93
![site]()
Set of two sliding door cabinets
Dimensions of a cabinet: 1520 x 440 x 2010 mm - Origin: France - Approx. weight: 50 kg - LOT 94
![site]()
Set of two sliding door wardrobes
Dimensions of a cabinet: 1520 x 440 x 2010 mm - origin: France - weight: approx. 50 kg - LOT 95
![site]()
Set of two sliding door wardrobes
Dimensions of a cabinet: 1520 x 440 x 2010 mm - origin: France - weight: approx. 50 kg - LOT 96
![site]()
Set of two sliding door wardrobes
Dimensions of a cabinet 1520x440x2010 mm - origin France - weight approx. 50 kg - LOT 97
![site]()
Set of two sliding door wardrobes
Dimensions of a cabinet 1520x440x2010 mm - origin France - weight approx. 50 kg - LOT 98
![site]()
Set of two sliding door wardrobes
Dimensions of a cabinet: 1520 x 440 x 2010 mm - origin: France - weight approx. 50 kg - LOT 99
![site]()
- LOT 100
![site]()
- LOT 101
![site]()
- LOT 103
![site]()
HP DESIGNJET T2300 PostScript multifunction printer
Serial number CN23UK007 - Power 120W - 2A - year 2012 - origin China - weight 50 kg - LOT 104
![site]()
- LOT 106
![site]()
NIROLT 7-drawer storage cabinet
Dimensions 160x113x70 cm - Origin France - Weight approx. 100 kg - LOT 107
![site]()
Homemade stainless steel table in 6 parts
Total dimensions 5x2 m: 4 pieces measuring 2x1 m + 2 pieces measuring 1x1 m - Weight 200 kg - Origin France - LOT 109
![site]()
Set of 2 ATAL metal lockers
Dimensions 82x33x110 cm - 2 columns of 5 flaps - Origin France - Weight 20 kg - LOT 110
![site]()
Set of 2 ATAL metal lockers
Dimensions 82x33x110 cm - 2 columns of 5 valves - made in France - Weight 20 kg - LOT 111
![site]()
Set of 2 ATAL metal lockers
Dimensions: 82 x 33 x 110 cm - 2 columns of 5 valves - made in France - Weight: 20 kg - LOT 35B
![site]()
ABICOR BINZEL FE-200 filter extractor
Supply voltage 230 V - Power 1100 W - Vacuum 1900 mm/cm² - Flow rate 200 m³/h - Noise level 71 dB - Dimensions 390 x 210 x 500 mm - Weight 26 kg - Country of origin Germany - Year 2015 - LOT 102
![site]()
- LOT 105
![site]()
- LOT 108
![site]()
Lot of 7 ATAL metal lockers
Dimensions of a cabinet 40.5x32.5x201 cm - 7 blocks of 10 drawers - Weight approx. 200kg - Origin France - LOT 112
![site]()
Set of 2 ATAL metal lockers
Dimensions: 82 x 33 x 110 cm - 2 columns of 5 valves - made in France - Weight: 20 kg - LOT 113
![site]()
Set of 9 steel trestles
2 trestles: length 800 mm - height 700 mm - 1 trestle: length 1000 mm - height 800 mm - 4 trestles: length 800 mm - height 800 mm - 2 trestles: length 1500 mm - height 850 mm - origin France - weight approx. 150 kg - LOT 114
![site]()
Office furniture
Desk dimensions: 178x80x79 cm - Cabinet dimensions: 151x44x104 cm - Origin: France - Approximate weight: 40 kg - LOT 115
![site]()
Essential Information
General Information
- Auction Dates
- Starts: 11 December 2025 at 12:00 GMTEnds: 19 February 2026 at 14:00 GMT
- Site Address
- VierzonFrance
- Viewing Days
- By Appointment Only
Fees & Payment
- Currency
- EUR
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- A link to the invoice will be emailed to successful bidders
- Payment is due immediately on receipt of invoice
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
- NB: Please reference invoice number on bank transfer.
Goods
- Clearance days
- 03 March 2026 at 08:00 GMT - 20 March 2026 at 15:00 GMTCollection by appointment only. Appointments can be scheduled from March 3 to March 5, 2026, or for Lots 1 and 2 before the end of March 2026.
- General Collection Information
Collection
Collection is available by appointment from March 3 to March 5, 2026, except for Lots 1 and 2, which can be collected by appointment until March 20, 2026.- Buyers are fully responsible for removal of items plus all transport and rigging charges.
- Items are only available for collection once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- For a list of companies that can assist with removals and transportation please visit the Apex Auctions website's Service Providers section.
- Sales Contacts
- Auction informationAnais Tournois69 Middle Street
Brighton
BN11AL
United Kingdom info@apexauctions.co.uk+44 1273 224466

