Extremely Short Sale, Offered Encouraged – CNC Machining, Presses, Heat Treatment, Welding & Finishing Equipment
Starts: 07 October 2026 at 09:00 BST
Ends: 20 October 2026 at 15:00 BST
Surplus asset due to business restructure. Sale features a Maple Mone CNC VMC, Brenner surface grinder, Nordson powder coating system, AB Smålandsstenar NC presses, Radyne hardening machine, OMSG shot blasting, shaft-end machining, Rosler and Erba vibratory finishing, Colchester lathe, compressors and extensive supporting workshop equipment. Deadline for removal 6th November. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 62 of 62 lots
- LOT 1
![site]()
2025 Thompson & Hudson Automatic Cut Off Machine With Allen Bradley Panel View Plus Control
Overall Dimensions L5,400 x W1,160 x H2,200mm. With Staging. - LOT 2
![site]()
2016 Nordson Powder Coating System
Consisting Of Nordson 8 Nozzle Spray Booth, Nordson Spectrum VT 8 Station Powder Dispensing Unit With Siemens Simatic Touch HMI, Nordson Baking Oven, Nordson DF03-12 Extraction Unit & Conveyor System. Approx Footprint 12 x 8m. - LOT 3
![site]()
2016 Maple Mone 11 CNC Vertical Machining Centre With Mitsubishi M70 Control
Table Dimension 1,200 x 600mm ( 5 'T' Slots). Maximum Table Load 1,000kg. Axis Travel 'X'=1,100mm, 'Y'=600mm, 'Z'=600mm. Rapid Traverse 'X'=36m/min, 'Y'=36m/min, 'Z'=24m/min. Maximum Spindle Speed 10,000rpm (11kW Motor). Spindle Taper SK40. 24 Position ATC. S/No. M01050393 (2016) - LOT 4
![site]()
2025 Brenner 818 HAD Auto-Feed Surface Grinder With Siemens Smart Line PLC & Sino SDS6-2V 2 Axis DRO
Table Dimension 508 x 200mm. Magnetic Chuck Dimension 460 x 200mm. Max. Distance Between Table Surface & Spindle Centre 450mm. Max. Cross Table Travel 240mm. Max. Table Loading (Including Magnetic Chuck) 180kg. Speed Of Table (Longitudinal Travel) 5-25m/min. Cross Motion Intermittent Feed Rate 0.1-8mm/t. Rapid Speed 990mm/min. Feed Of Handwheel 0.02mm/div. Grinding Wheel Size 200 x 20 x 31.75mm. S/No. 2502088 (2025). - LOT 5
![site]()
Kaeser BSD 83T Rotary Screw Air Compressor With Sigma Control & FSN RD105/AC Air Dryer, Compare Owamat 14 Oil Separator & Abbott 1,000L Air Receiver
Maximum Working Pressure 8.5bar. Flow Rate: Approx. 5.34 to 8.14 m³/min. Motor 45kW. S/No. 1035 (2014). - LOT 6
![site]()
Compair 45-7.5A Rotary Screw Compressor With Delcos XL Control
Motor 45kW. Nominal Pressure 7.5bar. Free Air Delivery (FAD) 8.0 m³min. Noise Level 69dB. S/No. OD10024524001 (2016). - LOT 7
![site]()
2020 Mach VS-2SP Turret Milling Machine With Newall NMS300 3 Axis DRO
Table Dimension 1,370 x 252mm (3 'T' Slots). Maximum Table Load 500kg. Axis Travel 'X'=890mm, 'Y'=390mm, Quill=127mm. Spindle Taper SK40. Speed Range 420-5,000rpm (3.7kW Motor). Variable Speed Control. All Align Axis Power Feeds. S/No. 2020867 (2020). - LOT 8
![site]()
Colchester Mastiff 1400 Gap Bed Centre Lathe With EMS-i 2 Axis DRO
Ø310mm 3 Jaw Chuck. Swing Over Bed Ø535mm, Swing Over Cross Slide Ø370mm, Swing Over Gap Ø815mm, Height Of Centres 270mm. Distance Between Centres 1,500mm. Spindle Bore Ø90mm. Speed Range (16) 18-1,400rpm.QTC. Cross Slide Travel 280mm, Top Slide Travel 150mm. - LOT 9
![site]()
AB Smalandsstenar FCP 1600 NC Vertical Press With Control & BHP Feeder/Straightener
Press Force 1,600kN. Stroke 6-160mm. Strokes Per Minute 70. Top Platen Dimension 835 x 500mm (6 'T' Slots). Bottom Platen Dimension 1,080 x 820mm (4 'T' Slots). S/No. 7267 (1993). - LOT 10
![site]()
AB Smalandsstenar FCP 800 NC Vertical Press With Indramat CTA10 Control & BHP RF100 x 300 Feeder/Straightener
Press Force 800kN. Stroke 6-100mm. Strokes Per Minute 140. Top Platen Dimension 700 x 410mm. Bottom Platen Dimension 855 x 680mm. S/No. 6632 (1982). - LOT 11
![site]()
OMSG SG1 FAC Shot Drum Blasting Machine With Control & Extraction
Internal Dimension W700 x 850mm. With Internal Conveyor & Top Loader. S/No. 10875/04 (2004). - LOT 13
![site]()
Radyne Horizontal Hardening Machine With Inductelec PLC With 2 Lauda Ultracool Chillers
Approx Maximum Shaft Length 650mm. - LOT 14
![site]()
Weeren DH101G Twin Spindle Automatic Shaft End Machining /Chamfer Machine With Siemens TD390 PLC
Approx Maximum Shaft Length 650mm. S/No. E-309 (1998). - LOT 15
![site]()
Cambridge Solutions Shaft End Machining Machine With Fanuc 30i-Model B Control
6 Sided Rotary Table Dimension 1,000 x 250mm (3 'T' Slots). 4 Spindle, Spindle Taper ISO 40. With Hydraulic Clamps. - LOT 16
![site]()
Brio Solutions EB706 End Machining Machine With Siemens Control
6 Spindles. 4 Loaders/Transfer Units. Spindle Taper ISO 40. Power 31kW. S/No. 50005 (2005). - LOT 17
![site]()
Rosler ST 650 Vibratory Surface Finishing Bowl With Control Panel, Ashworth Conveyor & Walter Trowal ZM03 Centrifuge
Process Bowl Total Volume 650 Litres. Approx Bowl Dimension Ø1,660 x 620mm Deep. S/No. 22864/00 (2000). Conveyor Width 400mm. - LOT 18
![site]()
Erba PDJ Vibro EVK-500 Vibratory Surface Finishing Bowl With Control Panel
Process Bowl Total Volume 500 Litres. Approx Bowl Dimension Ø1,230 x 426mm Deep. (2018). - LOT 19
![site]()
Gebruder Hezel AMH3 Automatic Hydraulic Cut Off Machine
Approx Maximum Bar Length 3,600mm. With Staging. S/No.10696 (2002). - LOT 20
![site]()
Rhodes RF75 'C' Frame Vertical Hydraulic Press
Pressing Force 75 Ton. Top Platen Dimension 300 x 180mm. Bottom Platen Dimension 800x 600mm. Throat 275mm. - LOT 21
![site]()
Worcester 50 Vertical Mechanical Power Press With Tomal TGL-300 Decoiler & Pneumatic Feeder Unit
Capacity 18 Ton. With Surround Guarding. S/No. 50FBG 172. Tomac Material Width 300mm. Material Thickness 0.5-3.2mm. Material Weight 1,000kg. Speed 15m/min. S/No. 2014006 (2014). - LOT 22
![site]()
Worcester (Jones & Attwood) 18 Vertical Mechanical Power Press With Clarks Compact Decoiler & Pneumatic Feeder Unit
Capacity 18 Ton. With Surround Guarding. S/No. 18EBG730. - LOT 23
![site]()
Simec Ciclomec 350 CS P-P Cut Off Machine With Bar Loader
Blade Ø350mm. Round Profile Capacity Min Ø6mm To Max Ø120mm. Square Profile Capacity Max 100 x 100mm. Rectangular Profile Capacity Max 120 x 80mm. Minimum Cut Length 5mm. Standard Stroke (Feeder) 1,000mm. Cutting Tolerance ±0.15mm. Bar Loader Length 4,300mm. With Surround Guarding. S/No. 912 (1988). - LOT 24
![site]()
Logitrans ELF 1001 Electric Pallet Stacker
Capacity 1,000kg. Maximum Lift Height 1,650mm. Load Centre 300mm. S/No. 193E14198478 (2019). - LOT 25
![site]()
British Federal Spot Welder With 6 Station Horizontal Rotary Table & Parts Loader
Maximum Power 203 KVA. Thermal 100 KVA. - LOT 26
![site]()
British Federal Spot Welder With 6 Station Horizontal Rotary Table & Parts Loader
Maximum Power 306 KVA. Thermal 100 KVA. Maximum Pressure 2,240 lbs. - LOT 27
![site]()
British Federal Spot Welder With Thermal Exchange Compact 5000 Thermal Control Unit
Maximum Power 360 KVA. Thermal 100 KVA. Maximum Pressure 1,540 lbs. Mach/No. 19654. - LOT 29
![site]()
British Federal Spot Welder
Maximum Power 360 KVA. Thermal 100 KVA. Maximum Pressure 800kgf. Mach/No. 22101. - LOT 31
![site]()
- LOT 33
![site]()
British Federal Spot Welder With Thermal Exchange Compact 5000 Thermal Control Unit
Maximum Power 540 KVA. Thermal 200 KVA. Maximum Pressure 4,000lbs. Mach/No. 19832. - LOT 34
![site]()
- LOT 9A
![site]()
World Group SHL-300B Decoiler/Straightener
Material Width 300mm. Material Thickness 1-6mm. Coil Weight 2,000kg. Coil Inside Ø460-520mm. Coil Outside Ø1,000-1,200mm. Speed 15m/min. S/No. 40578-6102. - LOT 32
![site]()
British Federal Spot Welder With Thermal Exchange Compact 5000 Thermal Control Unit
Maximum Power 544 KVA. Thermal 250 KVA. Maximum Pressure 4,000lbs. Mach/No. 17540. - LOT 35
![site]()
- LOT 36
![site]()
- LOT 37
![site]()
- LOT 38
![site]()
Mobile Nordson Encore Paint Sprayer With Encore HD Spray Gun
Voltage 230V. S/No. AA15M00032. - LOT 39
![site]()
Torrent 500 Wash Cabinet
Solution Tank Volume 100 Litres. Operating Pressure 450psi. Maximum Temperature 55°C. Internal Dimensions W760 x W480 x H480mm. With Foot Switch. - LOT 40
![site]()
- LOT 41
![site]()
- LOT 42
![site]()
- LOT 43
![site]()
- LOT 44
![site]()
- LOT 45
![site]()
- LOT 46
![site]()
(4) Integrated Manufacturing Systems Conveyor System With Control
Conveyor Lengths 7,200mm, 5,000mm, 3,400mm & 1,400mm. - LOT 47
![site]()
Hedinair Electric Oven With Eurotherm 2216e Control
Internal Dimensions W610 x W610 x H700mm. Voltage 230V. S/No. 18283. - LOT 48
![site]()
P.J Hare 5IT Vertical Press With 4 Station Turntable
Capacity 5 Ton. Indexing Table Ø355mm. Approx Stroke 100mm. Strokes Per Minute 60. S/No. 8918. - LOT 49
![site]()
Axminster AT150BS Vertical Linisher With Coral Grindex DF1 Dust Extractor
Table Dimension 310 x 160mm. Belt Width 150mm. Belt Speed 750m/min. Power 750W. (2018). - LOT 50
![site]()
Axminster SB-25 Pillar Drill
Table Dimension 350 x 350mm (3 'T' Slots). Base Dimension 600 x 380mm. Spindle Travel 120mm. Column Ø92mm. Spindle Taper MT3. Maximum Drill Capacity Ø19mm. - LOT 51
![site]()
Alfred Herbert Sentinel Cri-Dan Type B High Speed Threading Machine
Speed Range 145-2,800rpm. Approx Swing Ø400mm. Distance Between Centres 800mm. - LOT 52
![site]()
Alfred Herbert Sentinel Cri-Dan Type B High Speed Threading Machine
Speed Range 154-2,802rpm. Approx Swing Ø400mm. Bed Length 1,400mm. - LOT 53
![site]()
Mezzanine Floor With Access Ladder & Lighting
Overall Dimensions L5,800 x W2,900 x H3,000mm. - LOT 54
![site]()
Twin Spindle Pillar Drill
Rise & Fall Table Dimension 605 x 395mm (2 'T' Slots). Throat 185mm. Speed Range (8) 84-1,465rpm. - LOT 55
![site]()
Walther Trowal G100-D Vibratory Maize Dryer/Polisher With Control
Capacity 100 Litres. Bowl Dimension Ø900 x 380mm Deep. S/No. 121-02392 (2017). - LOT 56
![site]()
Walther Trowal G100 Vibratory Maize Dryer/Polisher With Control
Capacity 100 Litres. Bowl Dimension Ø900 x 380mm Deep. S/No. 121-03453 (2017). - LOT 57
![site]()
British Federal W/6 Spot Welder
17 K.V.A. Maximum Amps 100. With Foot Switch. Mc/No. 22095. - LOT 58
![site]()
Bracker Radial RNE 280 Vertical Riveter
Rivet Capacity Ø1-12mm Shank. Maximum Riveting Pressure: Up To 1,700 daN. Air Pressure Range 1-6 bar. Working Stroke 5-40mm. Drive Motor 0.74 HP. Throat 125mm. S/No. 25802. - LOT 59
![site]()
P.J Hare 5BS Vertical Press
Bed Dimension 455 x 300mm (3 'T' Slots). Capacity 5-7.5 Tonnes. Adjustable Stroke 13-100mm. Throat Depth 135mm. With Foot Switches. S/No. 8495. - LOT 62
![site]()
- LOT 10A
![site]()
BHP MSC59-300X Decoiler/Straightener
Capacity 300 x 4.5mm. Maximum Coil Weight 2 ton. 4kW Motor. S/No. CN10279A (2000). - LOT 61
![site]()
Kent HVA-100 Single Colour Automatic Pad Printer With Extraction Unit
Table Dimension 280 x 105mm (1 'T' Slot). Travel 140mm. With Foot Switch & Manual. S/No. C-HVA100 (2009).
Essential Information
General Information
- Auction Dates
- Starts: 07 October 2026 at 09:00 BSTEnds: 20 October 2026 at 15:00 BST
- Site Address
- 1 TealgateCharnham ParkHungerfordBerkshireRG17 0YTUnited Kingdom
- Viewing Days
- By Appointment OnlyViewings strictly by appointment only – Please contact Apex to make an appointment.
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 26 October 2026 at 09:00 GMT - 30 October 2026 at 16:00 GMTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationSue SykesApex Auctions
69 Middle Street
Brighton
BN1 1AL
United Kingdom info@apexauctions.co.uk+44 (0)1273 224466