Surplus CNC Machinery & Equipment Following New Investment – Mori Seiki, Yida HMC, XYZ & Harrison Lathes
Starts: 07 October 2026 at 02:00 BST
Ends: 12 November 2026 at 15:00 GMT
Surplus CNC and engineering equipment following new investment, featuring a Mori Seiki MT2000α1 twin-spindle multitasking lathe, Yida MH-500 twin-pallet HMC, XYZ 1010 VMC, Harrison M500 centre lathe, Hydrafeed bar feeders and Kemper central extraction system. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing.
Share:
Showing 7 of 7 lots
- LOT 1
![site]()
2003 Mori Seiki MT2000α1 SZ CNC Twin Spindle Multitasking Mill/Turn Slant Bed Lathe With Mori Seiki SG-501(Mapps) Control
Main Spindle Crawford Ø165mm Collet Chuck. Sub Spindle Ø205mm Kitagawa B-208 3 Jaw Power Chuck. Maximum Swing Ø749mm. Swing Over Cross Slide Ø599.4mm. Distance Between Spindle Approx 1,280mm. Bar Capacity Ø63.5mm. Sub Spindle Bar Capacity Ø43mm. Axis Travel 'X'=565mm, 'Y'=±80mm, 'Z'=1,077mm, 'B'=±120°. Maximum Main Spindle Speed 4,500rpm (22kW Motor). Maximum Sub Spindle Speed 6,000rpm (15kW Motor). 12 Station Turret. Milling Spindle Capto C6. 60 Position ATC. S/No. MT201CA0226 (2003). - LOT 2
![site]()
2008 Yida MH-500 CNC Twin Pallet Horizontal Machining Centre With Fanuc Series Oi-MC Control
Pallet Dimensions 500 x 500mm. Maximum Pallet Load 500kg. Maximum Workpiece Dimensions Ø570 x 640mm High. Axis Travel 'X'=610mm, 'Y'=510mm, 'Z'=610mm. Rapid Traverse 'X'=32m/min, 'Y'=32m/min, 'Z'=32m/min. Maximum Spindle Speed 6,000rpm. Spindle Taper BT 40. 60 Position ATC. Maximum Tool Ø76mm (Ø127mm Non Adjacent), Maximum Tool Length 300mm, Maximum Tool Weight 7kg. /No. P40024 (2008). - LOT 3
![site]()
XYZ 1010 VMC CNC Vertical Machining Centre With Siemens 810D (Shopmill) Control
Table Dimension 1,200 x 450mm (5 'T' Slots). Table Load 850kg. Min - Max Height Under Spindle 150~659mm. Spindle Centre to Column 520mm. Axis Travel 'X'=1,010mm, 'Y'=509mm, 'Z'=509mm. Rapid Traverse 'X'=24m/min, 'Y'=24m/min, 'Z'=24m/min. Maximum Spindle Speed 8,000rpm (11kW Motor). Spindle Taper BT 40. 24 Position ATC. S/No. V0709409 (2007). - LOT 4
![site]()
Harrison M500 Gap Bed Centre Lathe With Newall Sapphire 2 Axis DRO
Ø310mm 3 Jaw Chuck. Swing Over Bed Ø530mm. Swing Over Cross Slide Ø370mm. Swing Over Gap Ø730 x 180mm. Distance Between Centres 1,500mm. Centre Height 260mm. Spindle Speeds (18) 31-1,600mm, Spindle Bore Ø80mm. Tailstock Quill Ø73mm, Quill Travel 155mm, No.5 Morse Taper. Spindle Nose No.8 D1 Camlock. QTC. Motor 9.7kW. S/No. 500642 652. - LOT 5
![site]()
Hydrafeed Multifeed MX-1B Bar Feeder
Bar Capacity Ø3-80mm Standard. Bar Feeder Length 2,100mm. S/No. 5252L. - LOT 6
![site]()
Hydrafeed Multifeed ML1 Short Magazine CNC Bar Feeder
Bar Capacity Ø3-80mm Standard. Bar Feeder Length 1,770mm. S/No. C03186 (1998). - LOT 7
![site]()
Kemper Type 8310000006 Stand Alone Central Fume/Dust Extraction Unit With Control Box
Airflow 1200m³/Hr. 3,000Pa Max Pressure. 400 Volt. 3.5 Amp. 1.5kW Power. Weight 120kg. S/No. 160600344 (2016).
Essential Information
General Information
- Auction Dates
- Starts: 07 October 2026 at 02:00 BSTEnds: 12 November 2026 at 15:00 GMT
- Site Address
- Unit D2Stafford Park 4TelfordTF3 3BAUnited Kingdom
- Viewing Days
- By Appointment OnlyViewings strictly by appointment only – Please contact Apex to make an appointment.
Fees & Payment
- Currency
- GBP
- Buyers Premium
- 18% or as specified on individual items
- Payment
General payment information
- Payment is due immediately on receipt of invoice.
- All payments must be made in the currency on the invoice issued.
- Accepted forms of payment are bank transfer ONLY. We do NOT accept payment by card, cash or cheque.
Goods
- Clearance days
- 16 November 2026 at 08:00 GMT - 27 November 2026 at 17:00 GMTCollections strictly by appointment only.
- General Collection Information
Collection
- Buyers are fully responsible for removal of items plus all shipping and rigging charges.
- Items are only available to collect once the transfered funds have cleared, and a collection appointment has been booked.
- Buyers or third party movers must present an invoice to the on-site personnel when removing their items.
- Buyers must complete the removal of items within the clearance deadline. Normal removal hours are Monday to Friday, from 9am to 4pm (local time) unless otherwise stated.
- Contact and removal information will be emailed at the time invoices are issued.
- Sales Contacts
- Auction informationKata Keresztes69 Middle Street
Brighton
BN11AL
United Kingdom info@apexauctions.co.uk+441273224466