Excellent opportunities following the closure of a mechanical engineering and mechanical welding factory
MULTILOCATIONS auction: Lots 15A and 15B are located in Cognac, all other lots are in Vierzon. Please see the sale information section for any additional fees that may be applicable upon purchasing an item. NOTE: Vendor to approve all closing bids prior to Apex final invoicing. Collection is available by appointment from March 3 to March 5, 2026, except for Lots 1 and 2, which can be collected by appointment until March 20, 2026.
Ended: 19th February 2026 14:00
- LOT 1
![site]()
ViewCORREA FOX 40 gantry milling machine – 5 axes – 2020CORREA FOX 40 5-axis gantry milling machine – year of manufacture 2020 – HEIDENHAIN TNC 640 numerical control – machine installed in 2021 – X 4000mm, Y 3000mm, Z 1000mm – 40-tool changer – machine serial ...Sale has ended - LOT 2
![site]()
ViewKMT / LDSA WJA II 40.30 – 2 TI high-pressure water jet cutting machineYear 2012 - Working area: 4000 × 3000 mm (table 4440x3220mm - Maximum thickness: 200 mm (depending on material) – 2 heads - Longitudinal axis Y and V (slave) 4120mm - Transverse axis X: 3000mm - Max. speed for X and Y 30 m/min -...Sale has ended - LOT 3
![site]()
ViewCOMEV PICODUE 400 numerically controlled horizontal latheYear 2008 - Height at centre point 400 mm - Maximum diameter on bench 800 mm - Distance between centres 4000 mm - Maximum diameter above carriage 460 mm - 8-tool turret - Bench width 400 mm – Spindle bore 110 - Continuously variable...Sale has ended - LOT 4
![site]()
ViewPOREBA TR 135 B2 parallel horizontal latheCentre height 700 mm - Centre distance 4000 mm - Turning diameter 1350 mm - Broken - Ø 1600 mm in the broken section - Spindle speeds 5-630 rpm - Boring diameter 120 mm - 4 fixed steady rests of different diameters - 2 boring bars - ...Sale has ended - LOT 5
![site]()
ViewHURON RU 991 fixed bed milling machineX/Y/Z travels 4500/1000/1000 mm - Table dimensions 6155 x 1000 mm - Spindle speed 2066 rpm - Feed speed variator - Weight approx. 19 tonnes - Origin: FranceSale has ended - LOT 6
![site]()
ViewHURON RU 771 fixed bed milling machineX/Y/Z travels: 2500/1000/1000 mm - Table dimensions: 4155 x 1000 mm - Spindle speed: 2066 rpm - Weight: approx. 15 tonnes - Country of origin: FranceSale has ended - LOT 7
![site]()
ViewPOREBA TR 90 horizontal parallel lathecentre height 465mm - Centre distance 4000mm - Turning diameter 930 mm - Broken - Ø 1380 mm in the broken section - Spindle speeds 5-1500 rpm - Boring diameter 195 mm - 2 fixed steady rests of different diameters - 2 chucks - Weight ...Sale has ended - LOT 8
![site]()
ViewGSP 405 K 150 radial drillCM4 - Spindle travel 320 mm - Arm length 1500 mm - Drilling radius Min. 465 mm / Max. 1500 mm - Rotation speeds 12-1800 rpm - Spindle feed 0.045-0.50 mm/rev - Arm locking Hydraulic - Max. tool/table height 1400 mm – drilling die on t...Sale has ended - LOT 9
![site]()
ViewROLLAIR RLR 900 T 500 F soundproof screw compressorMotor power 7.5 kW (10 HP) - Air flow (at 8 bar) 0.9 m³/min (900 L/min) or 54 m³/h - Max pressure 10 bar (configurable 8/10 bar) - Noise level 68 dB(A) (soundproofed, can be installed close to workstations) - Power supply 400 V / ...Sale has ended - LOT 10
![site]()
ViewCOLLY PV200 S hydraulic pressCapacity 200 tonnes - Maximum operating pressure 250 kg/cm² - travel 360 mm - Table 1200 x 800 mm - Origin: France - Approximate weight: 5 tonnesSale has ended - LOT 11
![site]()
ViewALCERA 1203 milling machinetravel XYZ 700/300/450 mm - Table 1200x300 mm - Speed 40-2000 rpm - 6 hp motor - Weight 2000 kg - Origin: FranceSale has ended - LOT 12
![site]()
ViewSTANKO 7A420 Slotting machineSlider travel 20–200 mm – Table diameter 500 mm – Max. transverse travel 400 mm – Max. longitudinal travel 500 mm – Circular travel 360° – Weight approx. 2,000 kg – Origin: RussiaSale has ended - LOT 13
![site]()
ViewGSP 405 K 150 radial drillCM4 - Spindle travel 320 mm - Arm length 1500 mm - Drilling radius Min. 465 mm / Max. 1500 mm - Rotation speeds 12-1800 rpm - Spindle feed 0.045-0.50 mm/rev - Arm locking Hydraulic - Max. tool/table height 1400 mm – drilling die on t...Sale has ended - LOT 14
![site]()
ViewFARO FUSION portable measuring armYear 2012 - volumetric +/- 0.61 mm - single point 0.043 mm - 6 axes - portable articulated arm with magnetic base - software and screen - measuring range 1.8 m - origin China - weight approx. 30 kgSale has ended - LOT 15A
![site]()
ViewJUNGHEINRICH ETX 515 forklift truckSerial number FN353524 - max capacity 1500kg - 7kW - 80V - Year 2007 - dimensions approx. 1500x2000mm (without the forks), mast = approx 5000mm. Country of Origin: Allemagne / Germany. Weight: Approx. 6700 kg. This item is locate...
Sale has ended - LOT 15B
![site]()
ViewJUNGHEINRICH ETX 515 forklift truckSerial number FN345348 - max capacity 1500kg - 7kW - 80V - Year 2007 - dimensions approx. 1500x2000mm (without the forks), mast = approx 5000mm. Country of Origin: Allemagne / Germany. Weight: Approx. 6700 kg. This item is locate...
Sale has ended - LOT 15
![site]()
ViewYALE MS16 IL 1.6T stackerFork length 1150mm - Capacity 1.6 tonnes - 2017 - Weight 900kg - D852T02710R - Weight with battery approx. 1.2 tonnes - Origin ItalySale has ended - LOT 16
![site]()
ViewERNAULT BATIGNOLLES HN 500 horizontal parallel latheBetween centres 1600 mm - Dimensions 3302 x 1535 x 1230 mm - Maximum diameter above the bench 500 mm - Maximum diameter above the cast iron slide 320 mm - Maximum diameter above the steel slide 320 mm - Maximum diameter in the break 660 mm ...Sale has ended - LOT 17
![site]()
ViewBOMBLED 15 M moulding/knurling machinemax. thickness 6 mm - distance between rollers/gooseneck 475 mm - max. Ø allowed 1600 mm - 2 working speeds - 6 and 12 m/min - 5 hp motor - weight approx. 2000 kg - made in FranceSale has ended - LOT 18
![site]()
ViewVERNET C1 profile benderCapacity: 50 mm angle bars - Approximate weight: 800 kg - Origin: FranceSale has ended - LOT 19
![site]()
ViewNAGEOTTE FAD 3007 guillotine shearSale has ended - LOT 20
![site]()
ViewCOLLY P502A press brakeForce 50 tonnes - Max. bending length 2000mm - travel 100mm - 5 HP motor - Sold with tools - Weight 3 tonnesSale has ended - LOT 21
![site]()
ViewMAPE BAS150S double grinding and sharpening wheelSpeed 3000 rpm - Grinding wheel diameter 150 mm - Sharpening device - 1 hp motor Weight 200 kg - Made in FranceSale has ended - LOT 22
![site]()
ViewMAPE BAS double grinding and sharpening wheelSpeed 3000 rpm - Grinding wheel diameter 150 mm - Sharpening device - 1 hp motor Weight 200 kg - Made in FranceSale has ended - LOT 23
![site]()
ViewULTRA US40 sawSawing capacity: 400x350mm - Round capacity Ø 400mm - Blade length 600mm - 4 HP motor - Weight 1350kg - Origin: FranceSale has ended - LOT 24
![site]()
ViewCINCINNATI CHOMIENNE PE bench drillNo. 6534 - Capacity 17 mm - Speed 220 to 4000 rpm - 220/380 V - Origin: France - Weight: 250 kgSale has ended - LOT 25
![site]()
ViewNAGEOTTE CP1508 4-roller rolling machineCapacity 8x1500 mm - Approximate weight 3 tonnes - Origin: France.
Note: Possible electrical issue that may require attention.Sale has ended - LOT 26
![site]()
ViewUNELEC 5T double-girder overhead travelling crane with KI 5T hoistCapacity 5 tonnes - Height under hook 4000 mm - Reach 18000 mm - TELEMECANIQUE remote control with 7 buttons - Weight 5 tonnes - Origin: FranceSale has ended - LOT 27
![site]()
ViewALSTHOM 5T single-girder overhead travelling crane with 5T hoistHook height 4000mm - Reach 18000mm - TELEMECANIQUE remote control with 8 buttons - Lifting beam not included - Weight 5 tonnes - Made in FranceSale has ended - LOT 28
![site]()
ViewSAF-FRO DIGI@PULS 420 welding machinePower: 420A (60%) - 350A (100%) - Power supply: 400V three-phase Consumption: 22.1A (Imax 28A) - Weight: 40kg source only - Origin: FranceSale has ended - LOT 29
![site]()
ViewAIR LIQUIDE SAF BUFFALO 400 DC welding machinePower: 400A (35%) 280A (100%) Power supply: 230/400V three-phase - Consumption: 77.2/44.4A - Weight: 185kg Dimensions: 1300x740x800mm - Made in FranceSale has ended - LOT 30
![site]()
- LOT 31
![site]()
ViewSAF SAXOTIG 1600 AC/DC welding machinePower supply: 230 V single-phase - Frequency: 50/60 Hz Maximum current consumption: 19 A (TIG) 29 V (ARC EE) - No-load voltage: 82 V - Welding current: 5 A to 150 A - Duty cycle at 40°C at 100%: 100 A - Duty cycle at 40°C at 60%: 12...Sale has ended - LOT 32
![site]()
- LOT 33
![site]()
ViewSAFARC M500 welding machineNo. 33569TG5230 - 95A/23.6V-530A/41V - 50 Hz - Origin: France - Weight: 40 kgSale has ended - LOT 34
![site]()
ViewSet of 4 lifting beams34A & 34B: 1170x230x400 mm - 18 hooks - 34C & 34D: 2600x210x300 mm - 30 hooks - weight 400 kg - origin FranceSale has ended - LOT 35B
![site]()
ViewABICOR BINZEL FE-200 filter extractorSupply voltage 230 V - Power 1100 W - Vacuum 1900 mm/cm² - Flow rate 200 m³/h - Noise level 71 dB - Dimensions 390 x 210 x 500 mm - Weight 26 kg - Country of origin Germany - Year 2015Sale has ended - LOT 35
![site]()
ViewKEVAC KMB3 extractor with castorsYear 2022 - serial no. 2022001374 - 13.5A - 50/60 Hz - dimensions 750x750x1600 mm - weight 65 kg - origin ItalySale has ended - LOT 36
![site]()
ViewPROFI 2.5T manual pallet truckCapacity 2.5 tonnes - Fork length 1150mm - Year 2010 - Weight 79kg - Origin GermanySale has ended - LOT 37
![site]()
ViewMIC 2.2T manual pallet truckCapacity 2.2 tonnes - Fork length 1150mm - Weight 61kg - Origin FranceSale has ended - LOT 38
![site]()
ViewGrooved cast iron machining cubeDimensions 1120 x 600 x 460 mm - With hook 440 mm long, 270 mm high - Weight 700 kg - Origin: FranceSale has ended - LOT 39
![site]()
ViewGrooved cast iron machining cubeDimensions 810x700x600mm - With hook 440mm long, 270mm high - Approx. weight 500kg - Origin: FranceSale has ended - LOT 40
![site]()
ViewCOMMERCY CYGAZARC 600 welding machine with wheelsNo. 94408 - Origin: France - Weight: 30 kgSale has ended - LOT 41
![site]()
ViewUSINOR 3T roller gantry with VERLINDE 3T hoistTotal height: 3500 mm - Reach: 3000 mm - Total length: 4200 mm - Origin: France - Approximate weight: 600 kgSale has ended - LOT 42
![site]()
ViewTKG 5.0 V manual pallet lifterFork length 1000 mm - weight 350 kg - total dimensions 1200x1050x1700 mm - Serial No. 0496243031 - Origin: GermanySale has ended - LOT 43
![site]()
ViewSet of 4 welding curtainsCurtain height 1650 mm - total dimensions 1350x700x2000 mm - weight approx. 50 kg - origin FranceSale has ended - LOT 44
![site]()
ViewSTRESS RELIEF ENGINEERING FORMULA 62 C vibration stress relief machine3 operating modes - variable frequency control - analogue resonance meter - 220/230 V - 50 Hz - weight 80 kg - origin USASale has ended - LOT 45
![site]()
ViewMASTOCK 500kg jib crane with YALE 500kg hoistHeight under hook 2750mm - Approx. reach 4000mm - TELEMECANIQUE remote control with 3 buttons - Made in France - Approx. weight 800kgSale has ended - LOT 46
![site]()
ViewMASTOCK 500kg jib crane with MASTOCK 500kg hoistHeight under hook 2750 mm - Approx. reach 4300 mm - TELEMECANIQUE 4-button remote control - Made in France - Approx. weight 800 kgSale has ended - LOT 47
![site]()
- LOT 48
![site]()
ViewSet of 19 metal binsExternal dimensions 790x630x600mm - Internal dimensions 720x530x390mm - Unit weight 32kg - Made in FranceSale has ended - LOT 49
![site]()
ViewCOMMERCY PM 250 welding positionerØ 600mm - Max. rotation speed 220 rpm - Axial load 450kg - Made in France - Weight 300kg. Note: Possible electrical issue that may require attention.
Sale has ended - LOT 50
![site]()
ViewMAPE grinding and sharpening wheel220/380 V - Min/max Ø 90-150 mm - Max. speed 2800 rpm - Origin: France - Weight 150 kgSale has ended - LOT 51
![site]()
ViewCONSTAN grinder and sharpenerSpindle speed 4,200-9,600 rpm - Grinding wheel Ø 128-56 mm - Max. Ø allowed 125 mm - Origin: France - Weight approx. 300 kgSale has ended - LOT 52
![site]()
ViewALSTHOM NP90A universal band saw1390 rpm - 220/380 V - belt length 2970 mm - origin France - weight approx. 600 kgSale has ended - LOT 53
![site]()
- LOT 54
![site]()
- LOT 55
![site]()
- LOT 56
![site]()
ViewLMR adjustable dividing plate with tailstock and 3-jaw chuck to be mountedChuck diameter 250mm - Tailstock length 225mm - Weight 600kg - Origin: FranceSale has ended - LOT 57
![site]()
- LOT 58
![site]()
- LOT 59
![site]()
ViewHomemade ovenCapacity approx. 250 degrees - External dimensions 1020x840x740mm - Internal dimensions 600x800x400mm - Approx. weight 400kg - Origin: FranceSale has ended - LOT 60
![site]()
- LOT 61
![site]()
ViewGas cutting trolley with wheelsGas cylinders not included - Approx. weight without cylinders 100kg - Origin: FranceSale has ended - LOT 62
![site]()
ViewWorkbench with Dolex viceWork surface dimensions: 1920 x 1260 mm - Total height: 850 mm - Approximate weight: 200 kg - Origin: FranceSale has ended - LOT 63
![site]()
ViewVERNET hand shearsCutting length 175mm - Origin: France - Approximate weight: 100kgSale has ended - LOT 64
![site]()
- LOT 65
![site]()
- LOT 66
![site]()
- LOT 67
![site]()
- LOT 68
![site]()
- LOT 69
![site]()
ViewROCH micrometers with ROCH smooth ringROCH smooth ring gauge: Ø 125 mm - made in France - weight 10 kgSale has ended - LOT 70
![site]()
- LOT 71
![site]()
- LOT 72
![site]()
ViewMITUTOYO SJ-201M roughness tester with charger and accessoriesSerial no. 521661610 - Origin: Japan - Weight: 5 kgSale has ended - LOT 73
![site]()
- LOT 74
![site]()
ViewMITUTOYO rubber hardness tester with standardsSerial number 12687 - origin Japan - weight 5 kgSale has ended - LOT 75
![site]()
- LOT 76
![site]()
- LOT 77
![site]()
ViewSet of 9 ROCH and SINOR gauge blocksVarious sizes from 200 to 1000 mm - origin France - Approx. weight 200 kgSale has ended - LOT 78
![site]()
ViewBOLLHOFF BRK 10 lever pliers for socket nutsWith box and nuts of various sizes TUBTEC - origin Germany - Approx. weight 20 kgSale has ended - LOT 79
![site]()
- LOT 80
![site]()
- LOT 81
![site]()
- LOT 82
![site]()
ViewSet of CASTOLIN EUTECTIC welding and soldering rodsSet of various welding rods/electrodes/solder of different sizes - origin France - 80 kgSale has ended - LOT 83
![site]()
- LOT 84
![site]()
- LOT 85
![site]()
- LOT 86
![site]()
ViewSOREMAP 980 corded vacuum cleaner220 V - 6A - No. 5831478 - origin France - weight 20 kgSale has ended - LOT 87
![site]()
- LOT 88
![site]()
ViewSet of 11 aluminium and steel coils9 reels of SAF-FRO FILALU AIMg5 aluminium Ø 1 mm - 2 reels of SG2 steel - weight approx. 80 kg - origin FranceSale has ended - LOT 89
![site]()
ViewStore of various tools and equipmentScrews - nuts - washers - bearings, etc. - Origin: France - Approximate weight: 1.5 tonnesSale has ended - LOT 90
![site]()
ViewSet of 2 rolling trolleysRed FACOM trolley: dimensions 680x420x700 mm - Blue trolley: dimensions 800x350x1020 mm - Tools shown in photo included - Origin: Germany - Weight: 100 kgSale has ended - LOT 91
![site]()
- LOT 92
![site]()
ViewSet of two sliding door cabinetsDimensions of a cabinet: 1520 x 440 x 2010 mm - Origin: France - Approx. weight: 50 kgSale has ended - LOT 93
![site]()
ViewSet of two sliding door cabinetsDimensions of a cabinet: 1520 x 440 x 2010 mm - Origin: France - Approx. weight: 50 kgSale has ended - LOT 94
![site]()
ViewSet of two sliding door cabinetsDimensions of a cabinet: 1520 x 440 x 2010 mm - origin: France - weight: approx. 50 kgSale has ended - LOT 95
![site]()
ViewSet of two sliding door cabinetsDimensions of a cabinet: 1520 x 440 x 2010 mm - origin: France - weight: approx. 50 kgSale has ended - LOT 96
![site]()
ViewSet of two sliding door cabinetsDimensions of a cabinet 1520x440x2010 mm - origin France - weight approx. 50 kgSale has ended - LOT 97
![site]()
ViewSet of two sliding door cabinetsDimensions of a cabinet 1520x440x2010 mm - origin France - weight approx. 50 kgSale has ended - LOT 98
![site]()
ViewSet of two sliding door cabinetsDimensions of a cabinet: 1520 x 440 x 2010 mm - origin: France - weight approx. 50 kgSale has ended - LOT 99
![site]()
- LOT 100
![site]()
- LOT 101
![site]()
- LOT 102
![site]()
- LOT 103
![site]()
ViewHP DESIGNJET T2300 PostScript multifunction printerSerial number CN23UK007 - Power 120W - 2A - year 2012 - origin China - weight 50 kgSale has ended - LOT 104
![site]()
- LOT 105
![site]()
- LOT 106
![site]()
ViewNIROLT 7-drawer storage cabinetDimensions 160x113x70 cm - Origin France - Weight approx. 100 kgSale has ended - LOT 107
![site]()
ViewHomemade stainless steel table in 6 partsTotal dimensions 5x2 m: 4 pieces measuring 2x1 m + 2 pieces measuring 1x1 m - Weight 200 kg - Origin FranceSale has ended - LOT 108
![site]()
ViewSet of 7 ATAL metal lockersDimensions of a cabinet 40.5x32.5x201 cm - 7 blocks of 10 drawers - Weight approx. 200kg - Origin FranceSale has ended - LOT 109
![site]()
ViewSet of 2 ATAL metal lockersDimensions 82x33x110 cm - 2 columns of 5 flaps - Origin France - Weight 20 kgSale has ended - LOT 110
![site]()
ViewSet of 2 ATAL metal lockersDimensions 82x33x110 cm - 2 columns of 5 valves - made in France - Weight 20 kgSale has ended - LOT 111
![site]()
ViewSet of 2 ATAL metal lockersDimensions: 82 x 33 x 110 cm - 2 columns of 5 valves - made in France - Weight: 20 kgSale has ended - LOT 112
![site]()
ViewSet of 2 ATAL metal lockersDimensions: 82 x 33 x 110 cm - 2 columns of 5 valves - made in France - Weight: 20 kgSale has ended - LOT 113
![site]()
ViewSet of 9 steel trestles2 trestles: length 800 mm - height 700 mm - 1 trestle: length 1000 mm - height 800 mm - 4 trestles: length 800 mm - height 800 mm - 2 trestles: length 1500 mm - height 850 mm - origin France - weight approx. 150 kgSale has ended - LOT 114
![site]()
ViewOffice furnitureDesk dimensions: 178x80x79 cm - Cabinet dimensions: 151x44x104 cm - Origin: France - Approximate weight: 40 kgSale has ended - LOT 115
![site]()
